ZS-NJ-D959W03丨Multifunctional RTV-1 Silicone Sealant for LED adhesives

ZS-NJ-D959W03丨Multifunctional RTV-1 Silicone Sealant for LED adhesives

ZS-NJ-D959W03丨Multifunctional RTV-1 Silicone Sealant for LED adhesives

ZS-NJ-D959W03丨Multifunctional RTV-1 Silicone Sealant for LED adhesives

Model : ZS-NJ-D959W03
Payment : T/T
Certification : REACH, ROHS,UL
Packaging : 300ML/Cartridge, 2600ML/Cartridge
Brand : antas
Unit : Zhaoshun Technology(Guangdong) Co.,Ltd.
Supply Ability : 3000T/month
Port : GUANGZHOU
Place : GUANGDONG CONGHUA
W03 is a flame-retardant one-part environmentally friendly silicone alkoxy  sealant with room temperature curing. The product has good physical properties, good adhesion to various materials such as aluminum, copper, stainless steel, etc.; superior dielectric properties and excellent heat resistance. RTV-1 silicone sealant for led adhesives
Get a Quote
Product manual
ZS-NJ-D959W03 is one kind of the flame retardant type one-component alcohol silicone sealant which is room temperature curing. This products have the properties such as high strength, good adhesion, good adhesion on alumina, copper, stainess steel and other metal, excellent dielectric and good heat resistance. The general using temperature range is from -60℃～200℃. During the curing process, it will release the alcohols, which with no corrosion to the materials such as polycarbonate(PC) and copper. Absolutely compliance with the EU ROHS’s requisition.
Product feature
●Low-yellowing after cured, no corrosion to materials such as copper and PC (polycarbonate)
● No deactivation effect on platinum catalyst system, can be used with platinum catalyst system potting compound
● Flexible and stable from - 60 °C to + 200 °C after cured 
● Excellent weather resistance and aging resistance
● UL94-V0 flame retardant rating
 
Main purpose
● The power shell is sealed and waterproof and the connectors on the circuit board are fixed
● Adhesive fixing, sealing and shockproof of electronic components
●Can be used for bonding and fixing LED lighting, such as LED bulbs and tubes
Standards compliant
REACH, ROHS,UL
Technical parameters
  Item Standard Ordain Test method
Uncured Appearance White/Black paste Q/ZS 1-2016
Tack-free time（min） ≤15 GB/T 13477.5
Extrudability（g/s，25℃） 45~55 GB/T 13477.3-2017
Completely cure time(d) 3～7 Q/ZS 1-2016



Cured		 Specific Gravity (g/cm3) 1.55～1.65 GB/T 13354
Tensile strength (MPa) ≥2.0 GB/T 528-2009
Break elongation（%） ≥70 GB/T 528-2009
Shear strength（MPa） ≥2.0 GB/T 13936-2014
Hardness(Shore A) 50～60 GB/T 531.1-2008
 Use of temperature range (℃) -60 to+200 Q/ZS 1-2016
Volume resistivity（Ω·㎝） ≥1×1014 GB/T1410-2006
Dielectric strength (KV/·mm) ≥18 GB/T1408-2006
UL 94 Flame Classification UL94 V-0 UL 94
Thermal conductivity[W/（m·K）]  ≥0.4 ASTM D5470
Use restrictions
After Operating, unused sealant must be sealed and stored , and tighten the cap immediately,if the seal has a little crust when use it in the next time, remove it and it will not affect the normal use. During the storage process, the cartridge orifices may appear a small amount of the cured phenomenon, cleared it and can use it again, and no affection to the product performance.